Happy Wednesday,
Last night I remove trim panel on the inside of the A/C pedestal and began the arduous task of scraping the mounds of caulking off it with a plastic chisel.
In looking at the pedestal, I can't see how it is attached to the roof. There are no bolts or screws retaining it from underneath. I scraped away the caulking on the left side and saw there are no screws holding it down to the roof. There is a fa fair bit of give between the roof and pedestal as I scrap.
In looking at the rear torsion as it relates to the tubing running up to the shell, there may be enough length to it, to allow lifting it 4 inches without completely disengaging it, which would simplify the process of raising the shell.
|