Bill is correct about the thin plywood and the batteries being off center from the inside aisle. I wish I had taken a picture. If you do remove the plywood or cut a hole, you'll have to remove the bed to do it. And with the bed removed, you can stand up back there while outside under the shell. Thus, dropping it in from the outside would be way easier than from inside.
Dave
__________________
2000 2720SL & 2007 3124KB
2005 Toyota Sequoia
Twin Battle Born 12v 100Ah LiFePO4 (BBGC2) batteries, 300W solar on rear shell, Link 10, Lift kit, Maxxis 8008 225 75/R15 E tires
|