TrailManor Owner's Forum - View Single Post - Need to replace a cap on the kitchen sink faucet

**VogelCO** · 07-14-2021, 06:42 PM

Mine did the same thing when I forgot to leave the faucet valves open after draining tank for winter. Glued with superglue, has been fine for at least 3 years.

Just be sure to mate the pieces exactly, meaning turn them till they seat with no wobble, etc. Do this BEFORE applying glue and mark position, I used a black marker. Check this several times before applying glue, once glued wait overnight and then reinstall, hand tight only, no pliers, you should be good.

07-14-2021, 06:42 PM	#13
VogelCO Site Sponsor Join Date: Jul 2018 Location: Littleton, CO Posts: 1	Metal cap repair Mine did the same thing when I forgot to leave the faucet valves open after draining tank for winter. Glued with superglue, has been fine for at least 3 years. Just be sure to mate the pieces exactly, meaning turn them till they seat with no wobble, etc. Do this BEFORE applying glue and mark position, I used a black marker. Check this several times before applying glue, once glued wait overnight and then reinstall, hand tight only, no pliers, you should be good.