[Padgett]

Do not know what the "3 inch rule" is, do you mean clearance between the top of the tire and the wheel well ? Mine is 2.5" with 215x75x14s. A 205x75x15 LR D would have about 1/4" less but much higher load rating. As you can see from the attachment in the earlier post 5757 was built in April 2006.

Really do not like to raise the CG of a trailer since it can increase sway so if needed I'll make a 1/2" plate which should be plenty.

Am going to change that blank outlet by the converter with a real one, also plan to add a LED indicator light. Can turn off by opening the 30A MAIN CB.

What does the pushbutton on the Winegard outlet do other than turn the light on and off, 12v supply is not affected.