No Inteference
Quote:
|
Originally Posted by terryjones1
I have ordered a new Trailmanor 2720 with swing-around hitch.
I plan on using a weight distributing hitch.
The "Draw-Tite" spring bars are 30" long.
Is there any interference between the swing-around hitch & weight distributing hitch?
|
I have a Reese round bar WDH and a swing tongue TM and haven't had any interference between the spring bars and the swing tongue components. Draw-Tite and Reese are two brands of the same company and, AFAIK, hitch parts are pretty much the same for both brands. I would be very surprised if you have any interference between your WDH and tongue's swing parts...there have not been any such reports here at TMO.com since TM introduced the swing tongue beginning with, IIRC, the '02 models.
__________________
Ray
I use my TM as a base camp for hiking, kayaking, mountain biking, and climbing Colorado's 14ers
The Trailer: 2002 TM Model 2720SL ( Mods: Solar Panels (170 Watts), Dual T-105 Batteries, Electric Tongue Jack, Side AC, Programmable Thermostat, Doran TP Monitor System)
The Tow Vehicle: 2003 Toyota Tundra V8 SR5 4X4 w/Tow Package (Towing & Performance Mods: JBA Headers, Gibson Muffler, 4.30 gears, Michelin LTX M/S Tires, Prodigy Brake Controller, Transmission Temperature Gauge)
|