TrailManor Owner's Forum - View Single Post

**Kidkraz** · 12-01-2014, 02:41 PM

The locking levers are not designed to take potential shifting movements, the beds latches internally on the camper also help take up some of the stresses from high winds and such, but not driving the rig around.
Since most camp grounds I've stayed at are not all level and flat, you will more than likely overstress those fittings and cause some expensive damage.
So I would highly recommend not moving the camper with the ends open.

12-01-2014, 02:41 PM	#4
Kidkraz Site Sponsor Join Date: Mar 2013 Posts: 1,044	The locking levers are not designed to take potential shifting movements, the beds latches internally on the camper also help take up some of the stresses from high winds and such, but not driving the rig around. Since most camp grounds I've stayed at are not all level and flat, you will more than likely overstress those fittings and cause some expensive damage. So I would highly recommend not moving the camper with the ends open. Attached Thumbnails __________________ 2013 2619 80 watt solar panel/swing hitch/low profile A/C. Enduro 4445 caravan mover 2016 Dodge Ram 1500 V8 Hemi Installed powered folding tow mirrors Stopped playing with airplanes, now I just enjoy watching them fly by.