View Single Post
Old 01-28-2010, 03:56 PM   #6
Scott O
Guest
 
Posts: n/a
Default

Regarding the WDH, you may or may not need one. Do the following: Measure carefully the distance from the fender bottom center on a front and back wheel, to the ground, same side. Then attach the TM and remeasure. If the front goes up and the back goes down you need a WDH. A properly adjusted WDH will allow the front and rear to sag the same amount. Problem with having the front go up is that you will be decreasing steering and braking. There is a primer on this forum if someone will point you to it.
  Reply With Quote