Quote:
Originally Posted by Brittany Dogs
OK the problem with my aluminum wheels is the recess for the stem. It is at least 3/8" or maybe 1/2" down and the outer metal washer would never work on top of that recess. The only thing that fits down the recess is the nut but that is even a tight fit and there would be no way to turn the nut once it is down that recess to catch the threads.
|
I understand what you are you saying, and some wheels are made like that.
Sounds like what you need is this below. These kind are made for your possible problem. It has a smaller diameter outside washer and the nut itself is smaller and extended further out to not interfere with the lip of the wheel when tightening.
