[commodor47]

Bill,

The batwing coax cable runs to a pass through at the base of the hand crank. Removing the hand crank handle and cover plate reveals a cut opening in the ceiling aluminum (very sharp edges!!) where the gray coax coming from the batwing connects to a pass through to the coax leading to the lower area of the refrigerator. From there another pass through connects to the Wineguard wall plate on the panel along the side of the refrigerator. I am not sure how the coax is routed from the crank handle to the lower refrigerator area. Could it run along the wiring channel in the center of the front shell ceiling, along side the A/C then into the outside wiring harness along the support arm of the front shell and then into the lower refrigerator compartment?

I am in the process of placing some photos on a hosting site and will post a link shortly.

Dick