Quote:
Originally Posted by Bill
Regarding the ground point that I think may be broken in the front shell wiring. I'm not sure how easy it is to reach that intended ground connection, but you can run a check by opening up any one of the running light fixtures on the front shell, and running a temporary ground wire from the shell of the bulb socket to a known good ground. The edge of the jagged hole in the aluminum skin under the fixture is usually a good bet for a known good ground, and is easy to get to.
Bill
|
Excellent idea... I pulled my blue book and they state the ground is somewhere between the two under cabinet lights in the front cap INSIDE someplace. I will investigate this closely because I haven't noticed any ground wire there. The other possibility is the light over by the door is also out. That too is noted as ground and this light is shown to be split to those running lights. I have gotten water inside that fixture b4 so may need to revisit that one as well.