View Single Post
Old 01-07-2012, 02:51 PM   #1
hillbillyhotel
TrailManor Master
 
Join Date: Oct 2011
Location: EAST TENNESSEE
Posts: 699
Smile Wheel well mod on 91 tm

After reading here about some of the bad bad things from tire problems , was worried about going anywhere till the mod was done, so today was the day, what i used was two old wheel wells salvaged from a rockwood popup, they was perfect on the depth, just not long enough to go from side to side,was standing there looking at it when dw says cut in half, only trying to protect the corners right,so that is what was done, put in place and marked with tire still on it and on the ground so i would know where the went after it is lifted, self-tapping sheetmetal screws, screw gun and hammer, allwas got to have a hammer, went smoother than i thought, start to finsh about 4 hr, yes get three cans of foam, use gloves,make sure dw dog is put up so she stays out of stray foam, it may not be as nice as some i have seen, but i feel good after my first real mod to the hotel,
Attached Thumbnails
Click image for larger version

Name:	100_2377.jpg
Views:	97
Size:	2.49 MB
ID:	6820   Click image for larger version

Name:	100_2379.jpg
Views:	96
Size:	2.50 MB
ID:	6821   Click image for larger version

Name:	100_2381.jpg
Views:	94
Size:	2.47 MB
ID:	6822   Click image for larger version

Name:	100_2375.jpg
Views:	87
Size:	2.59 MB
ID:	6823  
__________________
[SIGPIC][/SIGPIC]

RANDY & VICKIE
2003 3124 KS
TV 02 AVALANCHE 2500 4X4 8.1L
W/ PRODIGY B.C.,MAXXIS 10 PLY,HONDA 3000I

TM HISTORY
(88) TM 25 KING, (91) TM 23,(98) 3023, (03) 3124KS
hillbillyhotel is offline   Reply With Quote