Quote:
Originally Posted by yoda911
Hi Karen
I used 3/4 inch cabinet grade ply just because I had it laying around. The lower step is 14 inches deep and the top is 10 inches but I had to add a piece of hard wood to the back of the 10 inch piece because it was bowing. Also, the electrical panel is right where the lower step goes so I had to pull the cover off and apply support strips vertically to it to allow access to the panel. This was just a trial run to see if it would work. The next step is to make it look like it belongs there. Hope this helps Karen.
http://www.trailmanorowners.com/foru...1&d=1335878707 |
Pretty nice!
__________________
2019 FORD 150.
2007 Trailmanor 3124KS...still got it.
Robin 1,000 Lb Weight Distributing Hitch ...still got it.
We replaced the tires on the TM July 2017 I will update when I have time to get the specs
What's new...we went to all LED lighting and love them.
New 3/25/16 two new horizontal propane tanks.
|