Quote:
Originally Posted by EAKlebe
I looked at the gray connector using a mirror. It looks (considering that my eyes are getting old) that it is a six pin in two rows of three connector.
|
That's it - two-rows-of-three configuration. The controller uses 4 of the installed pins. The fifth installed pin is almost certainly for a light that goes on-off and dims in sync with the dashboard lights. You won't connect anything to it. The red thing at the bottom of the connector body is a retainer for the pins, and can be removed if you really need to (try to avoid doing it). There is no locating pin - the locating/orientation of the connector halves is done via the ridges and matching grooves on the edge of the connector halves.
Bill