Jason
I haven't repaired those corners yet nor needed to. I have repaired the door clasps that go into the square tubing that edges the shells. I posted the info on that -- maybe a search on JB weld under my user ID would find it. I would open the foam around the screws a little and fill the void with JB Weld. Then grease the screws lightly and run the screws back in their original holes. If the holes are really ripped out, you might have to stuff some wood in there to give the screws a grip while the JB is curing. The grease is for that who-knows-why reason that someday you have to remove the screw.
Good luck. I think that will do the job for you. Leave the JB in the camper. It and duct tape come in real handy!
|