View Single Post
Old 07-06-2022, 10:36 AM   #37
Deb Mac
Site Sponsor
 
Join Date: May 2022
Location: Logan Lake, BC, Can
Posts: 217
Default

Quote:
Originally Posted by DudeAbides View Post
For the vent I made a hole in the side right above the line from the tank.
I love your set-up and am using it in my TM. PO had removed the recirculating toilet and simply replaced it with a high-profile aqua-magic, but no black tank. Just did their business straight down into the waste valve, sewer hose and into the sewer at the the campground. Since I already have a nice toilet in there, I am going to extend the box about 12" in the front, or get a nice short 5"-6" step stool, to step up to the toilet, and your feet aren't swinging in the air!

Did you find that 3/4" vent gives enough air behind when you open the dump valve? I was thinking of using one of those (except a straight fitting) T'd into an Oatey Sure-Vent. That should be plenty to give air as well as odour venting out the side wall. I figured I would press fit the Oatey to begin with, just in case it didn't work out. If it wasn't for wanting odour venting, I would just go with the Oatey, and avoid drilling a hole in my wall (I might try that to begin with anyway, and see how it goes)
Attached Thumbnails
Click image for larger version

Name:	p_1000722387.jpg
Views:	43
Size:	35.0 KB
ID:	21161  
__________________
2008 2720SL “The Kobayashi Maru”
2006 Toyota 4Runner, SR5, 4L V6
Deb Mac is offline   Reply With Quote