The following is from the manually-operated slide of my earlier TMs. I believe that the new electric slide is the same, except that you have to be aware of the slide mechanism (track? chain?) as you lift it and pull it out.
From outside the camper, start with the slide all the way in. You should be able to lift the front edge of the slide, and then insert a block or a hunk of board to hold it up. I don't believe it is fastened down in any way. While it is propped up, you should be able to see the rollers right at the front edge of the floor. Also, you should see the wooden stop blocks fastened to the floor right at the front.
To get access to the slide's rear wheels, pull the slide out all the way, hunker down, and repeat the operation. I recall that you could pull the entire slide out of the body of the camper if you lifted it up over the stop blocks.
Bill
|