I use an 8 inch level, that I don't even know where it came from.
I level side to side by measuring the rear bumper and use blocks/boards under the wheels to get it close. Then I level front to rear with the tongue jack. Before I set the corner jacks down I open it up. I use a frying pan with a little water set on the stove to level the stove. The fridge may be off slightly, but it is well within specification. I use the corner jacks to fine tune it to the frying pan.
The first year I leveled to the fridge. That was annoying because any water on the counter ran onto the seat.
Then I started leveling so that any water on the counter top ran back to the wall and then to the sink.
Then I fried an egg and was not happy with the outcome. Now I level the stove.
|