TrailManor Owner's Forum - View Single Post

scrubjaysnest · 12-02-2011, 02:53 PM

Bill,
The refrig lights fine if I use popbeavers method, and it will stay lit.

But that said you could be right propane devices like 10.5 to 11 inches of water column for pressure. As for setting the regulator all that takes is a u tube manometer.....worked with them things for close to 20 years.

The refrig flame looks correct, the pilot flame on the oven doesn't when compared to the other camper.

Cleaning is a good idea, the heater on the other camper would not light and that was due to a spider carcass inside the burner at the orifice.

12-02-2011, 02:53 PM	#10
scrubjaysnest TrailManor Master Join Date: Oct 2010 Location: Big Bend area, Florida Posts: 2,120	refrig Bill, The refrig lights fine if I use popbeavers method, and it will stay lit. But that said you could be right propane devices like 10.5 to 11 inches of water column for pressure. As for setting the regulator all that takes is a u tube manometer.....worked with them things for close to 20 years. The refrig flame looks correct, the pilot flame on the oven doesn't when compared to the other camper. Cleaning is a good idea, the heater on the other camper would not light and that was due to a spider carcass inside the burner at the orifice. __________________ Axis 24.1 E 450 chassis, 6 spd tranny. GVWR 14500# GVCWR 22000 # GW(scales) 12400 # [SIGPIC][/SIGPIC] mods: 2- 100 watt solar panels, on roof, 300 watts portable “They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin