Quote:
|
Originally Posted by jellis
Incidentally, I am trying to subscribe to the forum by check, but am having no luck with getting an address to send the check. (The website auto-answer feature is not working, at least with my computer setup.) Can anyone supply the correct address? Thanks again.
|
You can try the link that Chris gave me:
[email protected].
His snail mail address is
1759 Mesa Grande Loop
Rio Rancho, NM 87124
When we had a blowout on our 3124KS a few years ago, I used a bottle jack to raise the axle to the limit of the jack's cylinder. I lowered the scissors stabilizers to hold it at that height and then put blocks under the bottle jack to raise the axle even more. It took a couple of sequences of doing this to get the damaged tire high enough off the ground so that it could be removed. I carry a 6 ton bottle jack in our truck.
I like Mike's suggestion of using a combination bottle-scissors jack under the TM's axle, but, can't visualize how this device could be low enough to get under the axle with a flattened tire. Mike, do you have any links that will show what this device looks like?