Hey all,
I have a 2005 2720SD and the water pump went out. With the fresh water tank, water heater, and un-pliable water lines everywhere Im not sure how to go about replacing the pump. e.g. removing it safely and installing a new one.
I found this post about cutting access holes for the faucet:
https://www.trailmanorowners.com/for...ghlight=faucet
which I need to do anyways since I also have a leak back there. But that will only help maybe to loosen the high pressure side of the pump.
One thought was to also remove the sink since I will have access to disconnect the faucet lines but Im not sure how I will be able to get to all four of the mounting clips that attach the sink to the cabinet.
Perhaps I will have to remove the fresh water tank instead, but that is also a tight fit and potentially will need more plumbing work if I cant get all those those fittings to be as snug as they are today.
Anyone ever have to replace the water pump on the 2720SD that could give me some advice/best practice?