TM used a number of faucet sets over the years.Most (all?) of them can be opened up from the top, so you can remove and inspect the core or mechanism inside the valve. Are both the hot and cold sides of the faucet in trouble? If so, this would suggest a problem in the outlet pipe itself - the pipe which runs water from both the hot and cold valves into the sink. It may sound silly, but I would open up the faucet mechanisms, both sides, from the top, remove the cores, and push a wire backward into the spout and back toward the valves. If there is a blockage, it might push it out to where you can grab it with tweezers or needle-nose pliers, and remove it.
Bill
|