TrailManor Owner's Forum - View Single Post

**Bill** · 03-29-2007, 05:08 PM

Cheri -

I have the TM in the driveway today, in prep for several days in the Chiricahuas.

I measured the wheel well opening - I think you are looking for that information. Remember that I have the factory installed round wheel wells with the heavy plastic liner, and 14" wheels.

At the bottom of the wheel well, the fore-and-aft dimension inside the well is 28 inches.

At the bottom of the wheel well, the side-to-side dimension inside the well is 11 inches.

At the fore-and-aft center of the wheel well, the top-to-bottom dimension inside the well is 9 inches.

Hope this helps.

Bill

03-29-2007, 05:08 PM	#3
Bill Site Team Join Date: Feb 2003 Location: The mountains of Scottsdale, AZ, and the beaches of Maine Posts: 10,104	Cheri - I have the TM in the driveway today, in prep for several days in the Chiricahuas. I measured the wheel well opening - I think you are looking for that information. Remember that I have the factory installed round wheel wells with the heavy plastic liner, and 14" wheels. At the bottom of the wheel well, the fore-and-aft dimension inside the well is 28 inches. At the bottom of the wheel well, the side-to-side dimension inside the well is 11 inches. At the fore-and-aft center of the wheel well, the top-to-bottom dimension inside the well is 9 inches. Hope this helps. Bill __________________ 2020 2720QS (aka 2720SL) 2014 Ford F-150 4WD 5.0L Bill's Tech Stuff album