On my 2006 2619 I installed the inverter up front under the dinette bench door side. That way the inverter was close to the battery. The inverter I bought is a charger and has a Built-in transfer switch. I ran Metal case romax Inside the frame all the way to the back Went through the rear bumper storage and fished it in where the main power cord goes in. I disconnected my converter altogether Since the inverter had a charger. I removed the wire from GFI 20 amp breaker and ran my inverter bypass/battery charger to GFI 20 amp breaker output. GFI plugs I ran from the inverter output to the sub breaker panel to the black wire I removed from the GFI breaker to the plugs.
|