View Single Post
Old 02-05-2022, 10:56 AM   #9
rickst29
yes, they hunt lions.
 
rickst29's Avatar
 
Join Date: Aug 2005
Location: Reno, NV
Posts: 1,318
Default The power converter is working ...

Quote:
Originally Posted by Carlos Mas View Post
Thanks for all the input
This trailer is new to me and I’m trying to get it ready to use
The forward ceiling lights are not working and I’m getting no charge on the batteries.
I am testing 14.8 volts where the power joins the 12 v panel
In many models of TM, there is a switch to control the forward ceiling lights. But, if the 12V supply wire for the ceiling has shorted out, that could correspond to your blown fuse.

From your power converter's 12v fuse board, one wire (fused 30A) goes to the batteries, where yet another fuse is present before reaching the first battery terminal. Through many model years, TM used a spring-loaded glass fuse at the battery end. Over age, and with possible exposure to weather and H2S gas, the spring inside can rust and become non-conductive. I'll recommend replacing that spring-loaded fuse with an ATC version. (Just be sure that the leads for the ATC are large, AWG-10).
__________________
TM='06 2619 w/5K axle, 15" Maxxis "E" tires. Plumbing protector. 630 watts solar. 450AH LiFePO4 batteries, 3500 watt inverter. CR-1110 E-F/S fridge (compressor).
TV = 2007 4runner sport, with a 36 volt "power boost".
rickst29 is online now   Reply With Quote