Quote:
Originally Posted by ShrimpBurrito
...
VERY IMPORTANT: If you do this, however, be absolutely 100% certain that the battery leads, which you've removed off the battery, are insulated and won't touch each other. You definitely don't want them touching each other, or shorting to each other through some other common conductor, like the aluminum floor, as you otherwise will almost certainly do some damage, possibly even a fire. Wrap some electrical tape on them and just make sure they are far apart so there is no chance the bare ends of the wire will touch.
Dave
|
What about the bare ground wire (since it is all exposed wire)? Is that in anyway connected to the converter and thus will have electricity flow when plugged to shore power?