TrailManor Owner's Forum - View Single Post - Taking delivery of our new 3124KB and first trip

Skyjim73 · 07-01-2015, 09:35 PM

Padgett, they are on the tongue - I've got a KB with the front bunk, so all I needed to do was get another .75 more depth on the battery rails. Went for an inch just to make sure I would not have any clearance issues with the front lip of the shell coming down. The BCI group format is GC2H - I assume the H is for "high". I've got them in a pair of Seasense 50090641 snaptop plastic battery boxes and went overkill, tying them together with a 2/0 connector cable from Real Goods I had left over from a solar power project. The Seasense boxes were about 12 bucks from amazon and fit the taller batteries nicely.

Jim

07-01-2015, 09:35 PM	#3
Skyjim73 Senior Member Join Date: Oct 2014 Location: Valencia, CA Posts: 97	Padgett, they are on the tongue - I've got a KB with the front bunk, so all I needed to do was get another .75 more depth on the battery rails. Went for an inch just to make sure I would not have any clearance issues with the front lip of the shell coming down. The BCI group format is GC2H - I assume the H is for "high". I've got them in a pair of Seasense 50090641 snaptop plastic battery boxes and went overkill, tying them together with a 2/0 connector cable from Real Goods I had left over from a solar power project. The Seasense boxes were about 12 bucks from amazon and fit the taller batteries nicely. Jim __________________ 3124KB delivered 5/2015 - early unit from Nebraska. TM installed Dometic compressor fridge, lower battery rails, 4AWG batt cable, and PD converter during build. Custom RV installed cassette toilet, two 260 AH 6V batts, 2 UniSolar 64 solar panels, Morningstar MPPT controller/meter. Tow vehicle: 2016 Ram 1500 Outdoorsman CC 4x4 3.0 diesel.