[quote author=Civil_War_Buff link=board=20;threadid=1592;start=msg11216#msg1121 6 date=1072796846]
The only tip is to check the fuse box under the hood for the 12v fuse that will "power" your plug at the bumper. Take a look at this and it should help you figure it out...
http://community.webshots.com/photo/...88895873yHFPyV
[/quote]
I'll echo Larry on needing the fuse if you want to push 12v power to the TM while on the road -- wish his link was on this board when I was trying to find out why there was no juice and I had the tow package. On the flip side, remember that unless you have a battery isolator installed (there is a topic on this somewhere on this board) when you are stopped you could drain your Tow Vehicle battery if you have your refer set to 12v and have installed the jcase fuse. If you need a wire harness for your brake controller be aware that the 2003 and later connector has a different wiring configuration than earlier years even though the connectors are the same.
Best wishes for the new year,
Kevin