I installed a Jensen AWM975 Radio/DVD player. I added some reinforcement to the sink cabinet structure (inside) to support the weight using glue and some brads to hold the additional framing. I used some small zip ties to get the wiring under control (organized) before I installed it. It took about an hour to install. Blue tape, drill, and jig saw. I ran the DVD HDMI cable 15' under the rig using sip ties. Make sure that it is good quality. There were holes already in place, so no drilling was required. I removed the antenna cover receptical with amplifier by the stove and replaced it with a HDMI/Coax cover. Coax reconnected to the coax and the HDMI cable plugged into the back of the cover. I will send more pictures when I get the rig out of the garage. I also installed 2 more speakers. One by the bed and the other under the sink by the door. If you do this, just be aware of the placement of the speaker when the TM is in the folded down position by the door (Folded in position).
|