TrailManor Owner's Forum - View Single Post

Barb&Tim · 11-07-2011, 04:31 PM

The way I do it--

With hitch unloaded, I Choose my link setting by putting a piece of masking tape on my TV fenders above each axle. Then measure and mark the masking tape at a point that is the same distance from the ground above each wheel. Using these marks as a reference, load the hitch with different link settings and re-measure each time to see how much settle I get. The ideal is equal settle front and rear but if not possible then keep slightly more settle in the rear.

Tim

11-07-2011, 04:31 PM	#2
Barb&Tim TrailManor Master Join Date: Oct 2010 Location: Fayetteville, NC Posts: 621	The way I do it-- With hitch unloaded, I Choose my link setting by putting a piece of masking tape on my TV fenders above each axle. Then measure and mark the masking tape at a point that is the same distance from the ground above each wheel. Using these marks as a reference, load the hitch with different link settings and re-measure each time to see how much settle I get. The ideal is equal settle front and rear but if not possible then keep slightly more settle in the rear. Tim __________________ Previous owners of a great 2010 [SIGPIC][/SIGPIC] TM2720SL.