Wayne, that Hayden looks to be the same unit I installed. I only had to buy some extra hose and a few fittings to mount it they way I wanted it. (I didn't want to cut any tranny lines for the gauge sending unit, etc)
I also installed the B&M inline temp gauge at the same time. Basically, I installed the sending unit with the cooler and then ran the wire for the gauge into the dash. I later installed the gauge and made the final electrical connections.
I had the advantage of installing the cooler while I was reinstalling my engine so I wasn't fighting a bunch of extra components on the front of the engine.
Basically it's not a major job. I think if you spent one Saturday taking the grill off and a few other things to do some planning, and then another Saturday to do the job, you would be ok.
Once I had my plans and parts, I think the install took a half a day.
|