Looking at the 15" option I see at least one person a couple pages back used the Endurance 205/75/R15 tires on a TM2720.
It appears this would work well. Is there any reason to go with the 225 size instead?
I have over 3" of clearance above my current 14" tires.
From etrailer the ones I'm looking at can be purchased with wheels for $214 each:
Goodyear Endurance ST205/75R15 Radial Tire w 15" White Spoke Wheel - 5 on 4-1/2 - LR D
Specs:
• Rim dimensions: 15" diameter x 5" wide
• Bolt pattern: 5 on 4-1/2"
• Wheel bolt size: 1/2"-20
• Wheel capacity: 2,150 lbs
• Pilot diameter: 3.19"
• Offset: 0
• Valve stem hole diameter: 0.453"
• Tire size: ST205/75R15
o Section width: 7.99"
o Outer diameter: 27.13"
• Tire capacity:
o Load range: D
o Ply rating: 8
o Maximum load: 2,150 lbs at 65 psi
• Tread depth: 8/32"
• Maximum speed: 87 mph (speed rating N)
• Limited warranty with free tire replacement
Some in prior posts have mentioned not getting a 5" wide rim and so that is another question I would have with these. Is that only due to wanting a higher weight capacity or is there some other reason as far as fit or something that I should be aware of?
Thanks again,
Dave
|