Thread: Flag mounting?
View Single Post
Old 09-27-2013, 09:06 PM   #4
Mrfixit
Member
 
Mrfixit's Avatar
 
Join Date: Feb 2011
Location: Fort Mill, SC
Posts: 19
Default

We have a 2720 and always fly a flag at the campsite. I use a pressure treated 2x12 about 24" long. I screwed down a 2" galvanized pipe flange at one end of the board. Since we almost always need to level the TM side to side, I use the 2x12 on the low side (it will stick out far enough to work on either side and is aft of the awning). A 10" galvanized pipe nipple is screwed into the flange and our 16' retractable flag pole (Harbor Freight) slides right in. The 16' height is enough to fly a 3x5 nylon flag in most conditions above the TM roof, and it dries quickly. I strap the board across the top of the propane tanks for travel.

Skip
__________________
Skip & Eleece
Foster's (Australian Cattle Dog)
Bailey (Border Collie)
Gandy (Blue-Fronted Amazon Parrot)

'03 2720SL
Swing hitch, Roof AC, Attwood elect. tongue jack, Stereo, 2.5" lift kit, 15" Kenda Loadmaster Tires (Load Range D)

2011 Dodge Ram 1500 (5.7 liter Hemi), Prodigy P2, Curt 600# WDH, McKesh Mirrors
Mrfixit is offline   Reply With Quote