Quote:
Originally Posted by tgpmd1
....One question, when we tested taking down the bathroom walls, the power went out, then came back on when the put the wall all the way down. Is that normal? We closed it up twice and it did the exact same thing, but everything else electrical seems fine.....
|
This is not normal. The power should go out when the wall is down and not come back on until the rear bath wall is set back up. There is either a defective switch in the bath wall, a short in the wiring or most likely a misadjusted switch in the wall.
The power must be off to the rear roof while traveling. The motion of the rear shell while traveling can turn on the lights over the bed. These lights will overheat when on and compressed between the roof and the bed. They can ignite the bed covers and you could find that you are towing a fireball.
You can remove the 12 volt fuse for the rear shell lights to prevent this while towing the TM home.
Mike