[thewayneo]

Thanks Robert.

From the dimensions, it says 17-1/8" front to back. Sealand says the hole is centered, so about 8-1/2 to center of pipe. I tried to "reckon" that with Electromagic specs that say 19-13/16 front to back, but when I actually measure mine I only get 16 - 17". So I don't trust specs accuracy. If the factory can easily move the hole just a bit, I'll have room to spare and it'll go fairly easy. If not, plan "B" kicks in. Also, there seems to be a couple different install instructions kickin around. Shrimp Burrito had a thumbnail attached calling it a "Travelor" with the 10 x 10 hole and I hope to clear that up with the factory today.

Anyway, I thoroughly appreciate and need all input!