TrailManor Owner's Forum - View Single Post - How are the shower controls mounted to the wall?

**ShrimpBurrito** · 06-16-2009, 11:47 AM

Hmmm.....interesting. I had removed the top moulding strip and the 2 exposed screws directly underneath that go directly through the faux wall to the real wall, and that didn't free anything up. I pulled out some staples that were under the moulding that may have be holding in a framing strip attached to the laminate to which the controls are mounted. Everything is still tight. I'm guessing those laminate pieces are all glued together.

Dave

06-16-2009, 11:47 AM	#3
ShrimpBurrito Site Sponsor Join Date: Jul 2006 Location: Sunny Beaches of Los Angeles Posts: 3,243	Hmmm.....interesting. I had removed the top moulding strip and the 2 exposed screws directly underneath that go directly through the faux wall to the real wall, and that didn't free anything up. I pulled out some staples that were under the moulding that may have be holding in a framing strip attached to the laminate to which the controls are mounted. Everything is still tight. I'm guessing those laminate pieces are all glued together. Dave __________________ 2000 2720SL & 2007 3124KB 2005 Toyota Sequoia Twin Battle Born 12v 100Ah LiFePO4 (BBGC2) batteries, 300W solar on rear shell, Link 10, Lift kit, Maxxis 8008 225 75/R15 E tires