Thanks people. Love the quick responses. I just got back from my first trip of the year and already closed the TM. Ill re-open it in a couple of days and post some pictures. The water pump was one of 3 three things that broke this year.
Ok so removing the sink maybe seems like a bad idea since no one had any positive feedback on that.
But removing the doors and stile, and most likely the trap/drain pipe under the sink should give me enough room to remove the pump. Maybe I could swap it out, but im going to assume that the Shurflo 4008 Revolution wont be a perfect fit and I may have to relocate the pump vs. trying to do any plumbwork back there.
If I need/want to relocate it... Deb Mac, a couple questions for you...
So you cut the vinyl outgoing side and just used PEX with a hose clamp? Did you just use a pipecutter tool? Maybe a hacksaw. I can see that pipe cracking if I tried to cut it.
The incoming side I think is already PEX, so you just used a male-male fitting to extend that to the pump?
Is the pump just mounted to the plywood and resting on a piece of foam?