TrailManor Owner's Forum - View Single Post - SOLUTION: The ultimate fresh water transfer pump

**Lesherp** · 09-01-2011, 07:58 AM

This is ingenious. Thank you so much for your information and explanation. I have ordered the parts I need from the place you suggested as I could not find them locally.

I have a couple of other question. I see some type of black connector attaching the line from the holding take to the bridge. It looks similar to the ones used to attach the PEX to the faucet. Is that what it is? In the picture I can’t really see how you attached the bridge to the pump. It looked like you maybe used the original connection going into the pump, some flex hose with a clamp on the bridge. Is this correct or is there another one of the black connectors like the one for the holding tank connection?

09-01-2011, 07:58 AM	#33
Lesherp Site Sponsor Join Date: Jul 2010 Location: Oregon Posts: 412	This is ingenious. Thank you so much for your information and explanation. I have ordered the parts I need from the place you suggested as I could not find them locally. I have a couple of other question. I see some type of black connector attaching the line from the holding take to the bridge. It looks similar to the ones used to attach the PEX to the faucet. Is that what it is? In the picture I can’t really see how you attached the bridge to the pump. It looked like you maybe used the original connection going into the pump, some flex hose with a clamp on the bridge. Is this correct or is there another one of the black connectors like the one for the holding tank connection? __________________ Roger and Patty TM:2006 2720SL TV: 2010 Tundra w/ tow pac. Dealer Options:swing tongue, sink cabinet, awning, air conditioning, tile Modification: 15“ tires & monitor system, WDH, Prodigy B.C., 2-6 V. batteries & clipper monitor, LED's. Additional modifications can be seen in albums. Pictures of campsites and places we visited can be seen at https://www.flickr.com/photos/101899116@N06/sets/.