My WDH is for 750 - 1000 lbs. The main thing is you don't want one that is too light. The tongue weight of our 2619 is around 350 and there is no problem using the heavier bars since you basically only use what is needed to bring the TM and TV back to level. The main thing is to restore the weight and steering to the front axle and to get the headlights out of the treetops. I would check out their setup before redoing the whole thing. If the TM and TV are level and there are enough links between the bar and the bracket, I wouldn't worry about it. If it all worked towing it back I would say it's probably O.K. Towing in the mountains shouldn't affect anything. A good way to check is to measure from the ground to the lip of the wheel well on the front and rear of the TV BEFORE hooking up the TM and then snap up the chains (on the link they had them on) and see if the front and rear of the TV go down equally. If they don't, try another link. Don't get it to where there aren't enough links between the snap bracket and the bars or there will be trouble on turning. (The bars DO NOT have to be level) Now that I've totally confused you. . .
|