Check your tow vehicle to determine if the 12 volt hot lead for charging the traielr batteries has power to it. Sometimes it is disconnected.
I have used my TM corner jacks to change a flat. I do not carry an extra jack. I did have to use the hand crank, because my cordless drill would not lift the load.
I have a small case of hand tools that I always carry, but since March 2005 I do not recall ever usignt hem on the TM.
The screws on the TM require a square head. My TM came with a special screw driver. See if the seller has one that goes with the trailer.
In case you have a problem with the latches, take along some straps or rope. I would guess that 30 feet is enough to wrap around the TM. I only suggest this because you may not know the true condition of the trailer. For lack of an inexpensive part you might otherwise be stuck somewhere.
Tire pressure gauge, so you will know how much are is in the TM tires. Do not trust a kick the rubber test.
Make sure the brake controller in your TV is operational.
|