View Single Post
Old 10-25-2013, 12:55 AM   #1
takeachance
Guest
 
Posts: n/a
Default NEWBIE Question: Internal Trim of 2720 SL

Just about ready to take the plunge on a 2008 2720 SL, it is in good condition with all appliances in working order. A couple of things I have notice:

1st is the internal trim in the rear where the back wall and the left wall join, there is a inch gap between the joint pieces and the rear wall upper trim that joins with the corner has additional cocking where the owner tried to put cocking to get it to stay, should I be concerned since the outside appears to have a rock solid seal.

2nd is the seal on the sides of the bed there is just a piece of rubber and plenty of sunlight that comes up through the gaps, the walls have a slight outer bow to them but in is not that bad.

3rd is the rust around the metal trip in the roof vents, there appears to be a good seal, but it may be moisture that collected since they covered year round when not in use.

Thanks
Attached Thumbnails
Click image for larger version

Name:	IMG_20131025_174601.jpg
Views:	400
Size:	524.4 KB
ID:	9329   Click image for larger version

Name:	IMG_20131025_174511.jpg
Views:	385
Size:	405.9 KB
ID:	9330  
  Reply With Quote