Quote:
Originally Posted by Shane826
A weight distribution hitch just slides into the regular receiver on the vehicle. It’s not a permanent installation on the tow vehicle. Your off road bumper and receiver will probably work just fine with a WDH.
|
Shane is exactly right. We assume you have a 2-inch square hitch receiver (not a 1" square receiver), and the shank of the WDH will slide right into it. You need to be aware of ball height, and you may want to consider an adjustable-height ball-mount (the part of the WDH that holds the hitch ball). Popular wisdom says that the top of the ball should be 19 inches above the ground. If you have a bumper hitch, it may put the ball a bit higher than the one found on many vehicles, so you may need what is called an "adjustable drop hitch", meaning that it is adjustable to drop the height of the ball. The adjustment is nothing but a series of holes, and a couple bolts that go through at your chosen height. Here is a rather elaborate one.
Bill