View Single Post
Old 12-24-2022, 01:38 PM   #37
Bill
Site Team
 
Bill's Avatar
 
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,104
Default

Markozip -

Interesting. I was unaware of this slot, but sure enough, it is there. In your photo, it looks like your axle is mounted partway back in the slot. On my TM, the axle is mounted all the way forward in this slot, which obscures it from viewing from below. I have no idea if mis-positioning could cause sway, but it is nice to know the slot is there.

Bill

Quote:
Originally Posted by markozip View Post
7One more thought about sway. If you try all the suggestions and no results...
Today I looked underneath where the axle is bolted to the frame. Is the axle mounted perpendicular with the frame? In the picture you can see a slot. Is the gap the same on both sides? If the axle is NOT perpendicular with frame a small misalignment [one tire might be more forward than the other] may not appear until you reach the right speed. I am only guessing about this.
__________________
2020 2720QS (aka 2720SL)
2014 Ford F-150 4WD 5.0L
Bill's Tech Stuff album
Bill is offline   Reply With Quote