TrailManor Owner's Forum - View Single Post - WDH with Swing-away Tongue

scrubjaysnest · 12-08-2010, 06:16 AM

Talked with "Ed" at the factory and he said "on some 2720SL's you cannot use a WDH" Even if I can find longer spring bars, with the gap I have on the swing tongue curb side I not sure the WDH is a good idea for me. As I noted in another thread http://www.trailmanorowners.com/foru...DH&page=6going from a TV GVWR of 7100# down to 5000#, hitch limits without WDH means I have to look at this issue really careful.
Re read what Tim and Bill are using for springs bars mine are 22210 stamped on the trunnion. No "H" and they are 30 inches not 32. Also they don't have the little curve for the cam device.
I will need to look at these newer bars and go from there.

12-08-2010, 06:16 AM	#33
scrubjaysnest TrailManor Master Join Date: Oct 2010 Location: Big Bend area, Florida Posts: 2,120	spring bar length Talked with "Ed" at the factory and he said "on some 2720SL's you cannot use a WDH" Even if I can find longer spring bars, with the gap I have on the swing tongue curb side I not sure the WDH is a good idea for me. As I noted in another thread http://www.trailmanorowners.com/foru...DH&page=6going from a TV GVWR of 7100# down to 5000#, hitch limits without WDH means I have to look at this issue really careful. Re read what Tim and Bill are using for springs bars mine are 22210 stamped on the trunnion. No "H" and they are 30 inches not 32. Also they don't have the little curve for the cam device. I will need to look at these newer bars and go from there. __________________ Axis 24.1 E 450 chassis, 6 spd tranny. GVWR 14500# GVCWR 22000 # GW(scales) 12400 # [SIGPIC][/SIGPIC] mods: 2- 100 watt solar panels, on roof, 300 watts portable “They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin