Quote:
Originally Posted by Fdxflyer
Thanks for the info... I'll give it another look. The crack is in the "valley" of the longest reinforcement ridge on the bottom of the tank so abs fabric might work as reinforcement after I get the crack glued. There is no gap associated with the crack until I push up on the bottom of the tank so I may be able to force the crack open, fill it with abs cement and then reinforce it later. Again, thanks for the info.
|
I wouldn't bother "Gluing" ABS. It won't hold over time. That stuff must be chemically (or heat) welded. If you put glue on it, you may find yourself having to scrape it off and using the ABS patch before very long. ABS glue will not adhere to glue, it will
ONLY work on ABS.
That tank has a lot of flex in it when you're driving down the road.