Sue,
I am not sure if this will help, but I had the same problem about a year ago.
When I stood the bath wall up, everything worked fine for awhile, but all of the sudden it stopped. As you probably know, the back bath wall presses a button down and this allows power to the back of the TM. But in our case, the back wall was not pressing the button down far enough. I pressed the button down manually and everything started working. Some how the wall had been shifted just enough to where it would not press it down far enough. This could have something to do with the TM not being level as well. If pressing it down manually works, you have found your problem. I was able to pull the wall back towards the bed a little more and that did the trick.
you might have already tried this, if so, I have no idea. Maybe someone else will chime in here.
Anyway, hope this helps.
John
|