View Single Post
Old 09-11-2006, 05:01 PM   #2
rtcassel
Site Sponsor
 
Join Date: Jul 2003
Location: MD
Posts: 410
Default

Quote:
Originally Posted by masterge
Do you need Equalizer/Weight Distribution hitch or not? I here TrailManor says to just tow with the ball and that that adding any sway/weight control is not needed and will might very well mask an overloading problem. I will be towing with a 2007 Chevy Avalanche with a Prodigy Controller, tranny cooler.

Do I really need anything other than a basic hitch set-up?
TrailManor says otherwise on http://trailmanor.com/WebDocs/Misc/Info&FAQ/FAQ.htm
"We recommend using a Class 3 hitch with load equalizing bars for most vehicles (not necessary on heavy trucks). The load equalizing bars transfer weight to balance the load between the front and rear wheels, which is necessary to level the vehicle and keep proper front end alignment on the tow vehicle. Your TrailManor dealer can recommend the proper hitch for your specific tow vehicle."

I have read on this forum that the sway control could mask loading problems.
__________________
Tim
2004 2720SL TrailManor, 2 X T105, Trimetric 2030RV, TST TPMS
2003 Tundra Access V8 2X4 w/Tow Pkg
Equal-i-zer 1000, Prodigy, McKesh, UnderCover
rtcassel is online now   Reply With Quote