4 pin to 7 pin
Ken,
Often the wiring harness already exists on the vehicle.
A quick check is to see if you have a plug under the dash (usually near the steering column) in the driver's position to attach a brake controller. If it is there, then there is probably a plug in the rear to attach a 7-pin connector and positions in the fuse panel for fuses and a relay for brakes and trailer battery.
If not, then you need to use the kit such as the one from etrailer.
__________________
Don & Lory
2003 3023 - Passed on to friends
2013 2720 SL
TV - 2011 Ford Expedition w/towing package
|