Quote:
Originally Posted by Bill
Sorry, I didn't even see the extra pictures in your post. Now that I do, you are right, item 6 is what I called the fuse. In your case, though, the 30-amp fuse has been replaced with a 30-amp circuit breaker, probably self-resetting. This is a good change.
Bill
|
Bill - would you please look at the pictures again.
Why do I have 2 wires attached to the positive post? In my image (attached) I labeled them 1a and 2a. What would the second one be for?
I am trying to compare mine to yours and label as clearly as I can. What confuses me is that I have the same number of wires attached to the negative post as you show in your diagram, one is the ground and the other negative.
So why do I have the same number of wires attached to the negative post, but an extra wire attached to the positive post?
The 2 positive wires connect to the 30 amp circuit breaker and come out the other side. I don't know where they go to.
Thanks in advance. Once I get this all straight in my head, I will write up the connecting batteries for dummies version.
__________________
Sara & Sophie
(RIP Bailey - 12/6/2020)
Welcome Sophie DOB 1/5/2021
Mini Goldendoodle (who's not so mini)
New to me 2010. 2720SD TrailManor
New to me 2010 Chevy Traverse
Both purchased July 2013
Factory installed 80W solar panel.
New batteries June 30th 2018.
(SLIGC115 Duracell Ultra 6V Deep Cycle Golf Cart Battery x 2)
New bag seals Sept 2020
Rohent R7 HD 1080P RV Wireless Backup Camera Installed Sept 2020