[ThePair]

I like "no set up" installations, as much as possible. So, I mounted a pair of marine speakers to the frame, using self-tapping screws and no locking washers or anything. So far, several years later, and everything is still working just fine, stable, and not budging. I can remove them if I want (both from the mounts and from the wiring) easily...but I don't. This way, there's nothing to set up or take down, just tune the radio and fade from front to rear.

The speakers were relatively inexpensive, so if they eventually need replacement, I won't cry. As long as the brackets are intact, it's a simple swap. That convenience is worth more to me than a pack/unpack/set up scenario.