PDA

View Full Version : Prodigy Setting


crawdad
03-30-2007, 02:06 PM
Just purchased another TV and installed a prodigy BC. The other unit was a draw-tite, on a Ford Freestar minivan which I did not like, because of the jerking and always having to set the control. What do you recommend for a setting on the prodigy. I am towing a 2619 with a Ford 150, 5.4L. Leaving for a 30 day trip to California next week.
crawdad

Bill & Lisa
03-30-2007, 09:03 PM
first off - no boost, unless you are in hilly terrain then B1 would be okay. You are in the situation where the trailer weighs less than the tow vehicle. Tell you what, rather than typing it all out from memory I will give you the link to the instructions and you can print them out....

http://www.tekonsha.com/instructions/Prodigy%20Instruc%207689_H%20web.pdf

:new_bdays

Bill

MarknMaqhi
04-01-2007, 07:27 PM
Just follow the manufacturer instructions. I just purchased a Prodigy this week to replace the el cheapo unit I was using with the old pop-up. Setting it up took 5 minutes and you'll not be happier with a BC.

UpAndDown
04-03-2007, 03:04 PM
Try 5.0 it's a good starting point for the TM